JUICE LUBES Tubeless Setup Kits - 35mm Tape / 48mm Valves / 280ml Sealant

JUICE LUBES Tubeless Setup Kits - 35mm Tape / 48mm Valves / 280ml Sealant - The One-Stop Shop To Make Tubeless Setup A Breeze

A one way ticket to the perfect Tubeless Setup.

Our Tubeless Setup Kits contain everything you need to setup and maintain a tubeless-ready wheelset. Just select the right configuration for your chosen setup.

Packed in a recyclable cardboard box to give that ‘bundle’ feel, these kits offer big value and a saving of nearly 30% over buying the items individually. We've even included a handy QR code on the box to provide you with step by step instructions.

Pack contains:

1 x 10M Rim Tape

2 x Black Tubeless Valves

2 x 140ml Tubeless Tyre Sealant

STEP 1 - Get Set. 

Start with a clean dry rim, our Ultimate Workshop Degreaser will remove any grease or old adhesive. Use an old rag or microfibre cloth to wipe it away. 

STEP 2 - Tape It.

Start applying the tape 2 spoke holes back from the valve hole. Press the tape down firmly into the centre of the rim as you go and smooth it out towards the edges, removing any trapped air as you go. Take it steady.

Run the tape around the entire rim whilst keeping tension and working air from beneath the tape as you go. Finish 2 spoke holes past the valve hole. Cut the tape at 45 degrees for a cleaner finish.

Apply a finishing strip and use a small spike to pierce the tape over the valve hole. 

STEP 3 - Fit and Forget.

Fit our fancy valves.

Whack a tyre on and add some Tubeless Tyre Sealant. There's a dosage guide on the pouches.

Give 'er some wind and go tell your mates how you got airtight.